perma PRO C MP-6

The user can select LC unit sizes 250 cm³ and 500 cm³. Each perma PRO can be programmed for lubricant discharge in days, weeks or months, up to a maximum dispensing period of 24 months. The MP-6 distributor supplies up to 6 lubrication points directly without pressure loss (max. 25 bar) and enables the use of tube extensions up to a length of 5 m. perma PRO C MP-6 can also be operated in IMPULSE mode. The impulse for a lubricant discharge can be PLC controlled. Power is supplied via the machine and can be PLC monitored and controlled.

  • Applications

    Anwendungsbilder

    perma PRO C MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems (with same size runner blocks) in robots. Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive.

  • Product characteristics

    Setting via push button with display and LED

    Outlet display
    LED red/green = function

    • Easy configuration of discharge period and outlets
    • Display of remaining volume and active outlets
    • Status control on display
    • Easy to set and change at any time

    MP-6 distributor with 6 outlets – Number of active outlets can be user-defined

    • Supply of 1 to 6 lubrication points with same lubricant amount
    • Precise supply of lubrication points
    • Monitoring of lubrication point status

    Pressure build-up to 25 bar allows remote mounting up to 5 m per outlet

    Additional discharge (purge)

    • Installation outside of dangerous areas or at easy-to-reach places increases workplace safety and saves time
    • Higher equipment availability, since exchange during running operation possible
    • Lubrication point can be purged to clear blockages
  • Technical Data

    • Drive
      Electromechanical
    • Power supply
      External: 15–30 V
    • Housing
      Metal / Transparent plastic
    • Discharge period
      1 day to 24 months
    • Lubricant volume
      250 cm³, 500 cm³
    • Operating temperature
      -20 °C to +60 °C
    • Pressure build-up
      25 bar
    • Number of outlets
      1 - 6
    • Lubricants
      Grease up to NLGI 2
    • Max. tube lengths
      5.00 m
    • Impulse controlled
    • CE