73 results

Reducers and other fittings

Adaptor 1/4 BSP female to 1/8 BSP male 316SS Material: Stainless steel Part No: 2461/8SS 1/4 Hex socket Material: Brass Part No: 26 Nipple hex 1/4 BSP male to 1/4 BSP male Material:...

Lubricant data sheets

Grease Oil Data sheet search If you cannot find the required data sheet, please send your email request to admin@perma.com.au and we will provide it via email. Additives Additives are...

GreaseCartridge 400 gPail 1 kgPail 5 kg perma Multipurpose grease SF01 101585 107494 107508 perma Extreme pressure grease SF02 101588 107495 107509 perma High temp. grease SF03 101589 107496 107510...

Overview

perma-tec GmbH & Co. KG The name perma stands for innovative and creative solutions in lubrication technology. Single and multi point lubrication systems from perma-tec can be found in all types of...

perma NBCF FLEX

Installation kit (part no. K1CHS) Contents 1 x 1 point cage bracket 1 x Manual purge kit 1.0 mtr of 3/8” ID grease line 2 x Female swivel hose ends 1 x 90 deg elbow 1 x 1/4” BSPF – 1/8” BSPM...

Advantages at a glance

perma prevents up to 55 % of roller bearing failures A constant renewal of the lubricating film ensures equipment availability Reliable, clean and precise lubrication around the clock Discharge...

Conveyors

Lubrication points Pillow block housings and spherical roller bearings are used for drive / guide pulley support. Bearings and bearing housing seals must be permanently supplied with...

Electric motors

Lubrication points Lubrication points are located on the drive and non-drive end of the motor. Grease escape (grease drain hole, grease trap, grease relief port) is important. Bearings will overheat...

Pumps

Lubrication points Lubrication points (roller bearings) are located on the drive shaft between drive motor and pump. Lubrication of gland and labyrinth seals prevents the ingress of dirt or pumped...

Fans

Lubrication points The lubrication points (roller bearings) are located at the drive shaft between drive motor and fan impeller. Bearings and shaft seals must be permanently supplied with the right...